<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>培哲顾问设计 - 给排水</title>
    <link>https://www.peizhe.com/forum.php?mod=forumdisplay&amp;fid=615</link>
    <description>Latest 20 threads of 给排水</description>
    <copyright>Copyright(C) 培哲顾问设计</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Tue, 12 May 2026 15:36:06 +0000</lastBuildDate>
    <ttl>30</ttl>
    <image>
      <url>https://www.peizhe.com/static/image/common/logo_88_31.gif</url>
      <title>培哲顾问设计</title>
      <link>https://www.peizhe.com/</link>
    </image>
    <item>
      <title>怎么解决卫生间反臭问题？</title>
      <link>https://www.peizhe.com/forum.php?mod=viewthread&amp;tid=17941</link>
      <description><![CDATA[干区地漏是指设计在不常有水地方的地漏，常设计在卫生间干区的马桶或洗手台旁。预防需冲洗地面和突然漏水的情况。而干区地漏出现常常反臭问题，为了避免地漏反臭的现象，设计师们必须在水电工连接管道先进行交底。下面由华建工艺学社、华建环境设计研究所为设计师们 ...]]></description>
      <category>给排水</category>
      <author>家和万事兴</author>
      <pubDate>Mon, 04 Aug 2025 12:19:59 +0000</pubDate>
    </item>
    <item>
      <title>隐藏式马桶设计</title>
      <link>https://www.peizhe.com/forum.php?mod=viewthread&amp;tid=17858</link>
      <description><![CDATA[]]></description>
      <category>给排水</category>
      <author>张培哲</author>
      <pubDate>Wed, 09 Jul 2025 12:45:36 +0000</pubDate>
    </item>
    <item>
      <title>同层排水，其实很简单</title>
      <link>https://www.peizhe.com/forum.php?mod=viewthread&amp;tid=16462</link>
      <description><![CDATA[转自：dop设计

排水一直是设计师比较头疼的专业领域，它不像装饰知识一样，学完了就能给设计工作带来提升，但给排水又在隐蔽工程中十分重要，稍不注意就会遗留很多问题，今天咱们就来系统的介绍一下，主要解决以下问题：

1、设计师应该知道哪些建筑排水系统的知识 ...]]></description>
      <category>给排水</category>
      <author>张培哲</author>
      <pubDate>Mon, 07 Feb 2022 10:33:41 +0000</pubDate>
    </item>
    <item>
      <title>上行下给，下行上给，给水方式</title>
      <link>https://www.peizhe.com/forum.php?mod=viewthread&amp;tid=15365</link>
      <description><![CDATA[下行是指水平干管安装在地板下面，用水竖管在水平干管上面，所以叫下行上给供水方式。
各种给水系统按其水平干管在建筑物内敷设的位置可分为以下几种形式。
1.下行上给式
水平配水干管敷设在底层(明装、埋设或沟敷)或地下室天花板下，自下而上供水。
利用室外给水管 ...]]></description>
      <category>给排水</category>
      <author>张培哲</author>
      <pubDate>Sat, 08 Aug 2020 01:51:56 +0000</pubDate>
    </item>
    <item>
      <title>建筑给水、排水、消防施工工艺流程全解读</title>
      <link>https://www.peizhe.com/forum.php?mod=viewthread&amp;tid=15292</link>
      <description><![CDATA[UPVC排水立管安装工序流程立管上孔洞清理→上下吊线→支架安装→UPVC排水管安装→套管安装、固定→孔洞支模→浇砼→振捣→ 闭水试验→洞口二次浇砼、抹平→移交控制要点上下吊线、管道支架安装、排水管安装、支模、振捣、闭水试验共六个方面UPVC排水管道施工工艺流程图 ...]]></description>
      <category>给排水</category>
      <author>马列主义手电筒</author>
      <pubDate>Tue, 09 Jun 2020 02:18:50 +0000</pubDate>
    </item>
    <item>
      <title>【最新】室外给水设计标准GB 50974-2014</title>
      <link>https://www.peizhe.com/forum.php?mod=viewthread&amp;tid=15075</link>
      <description><![CDATA[中华人民共和国国家标准

消防给水及消火栓系统技术规范
Technical code for fire protection water supply and hydrant systems

GB 50974-2014

主编部门：中华人民共和国公安部
          批准部门：中华人民共和国住房和城乡建设部
施行日期：2014年10月1 ...]]></description>
      <category>给排水</category>
      <author>张培哲</author>
      <pubDate>Sun, 23 Feb 2020 00:24:53 +0000</pubDate>
    </item>
    <item>
      <title>【最新】游泳池给水排水工程技术规程 CJJ122-2017</title>
      <link>https://www.peizhe.com/forum.php?mod=viewthread&amp;tid=15066</link>
      <description><![CDATA[中华人民共和国行业标准

游泳池给水排水工程技术规程
Technical specification for water supply and drainage engineering of swimming pool

CJJ 122-2017

批准部门：中华人民共和国住房和城乡建设部
施行日期：2017年12月1日

中华人民共和国住房和城乡 ...]]></description>
      <category>给排水</category>
      <author>张培哲</author>
      <pubDate>Sat, 15 Feb 2020 11:34:27 +0000</pubDate>
    </item>
    <item>
      <title>【最新】给水排水管道工程施工及验收规范 GB50268-2008</title>
      <link>https://www.peizhe.com/forum.php?mod=viewthread&amp;tid=15045</link>
      <description><![CDATA[前言[hr]
中华人民共和国国家标准
给水排水管道工程施工及验收规范
Code for construction and acceptance of
water and sewerage pipeline works
GB 50268-2008
主编部门：中华人民共和国住房和城乡建设部
批准部门：中华人民共和国住房和城乡建设部
施行日期 ...]]></description>
      <category>给排水</category>
      <author>张培哲</author>
      <pubDate>Mon, 10 Feb 2020 03:34:24 +0000</pubDate>
    </item>
    <item>
      <title>【最新】公共浴室给水排水设计规程 CECS108：2000</title>
      <link>https://www.peizhe.com/forum.php?mod=viewthread&amp;tid=15041</link>
      <description><![CDATA[前言[hr]
中国工程建设标准化协会标准
公共浴室给水排水设计规程
Specification for design of water supply and drainge in public bathroom
CECS 108：2000
主编单位：山东省建筑工程管理局
批准单位：中国工程建设标准化协会
施行日期：2000年10月1日
    根 ...]]></description>
      <category>给排水</category>
      <author>张培哲</author>
      <pubDate>Fri, 07 Feb 2020 08:23:43 +0000</pubDate>
    </item>
    <item>
      <title>【最新】建筑给水排水设计标准 GB50015-2019</title>
      <link>https://www.peizhe.com/forum.php?mod=viewthread&amp;tid=15039</link>
      <description><![CDATA[前言[hr]
中华人民共和国国家标准
建筑给水排水设计标准
Standard for design of building water supply and drainage
GB 50015-2019
主编部门：中华人民共和国住房和城乡建设部
批准部门：中华人民共和国住房和城乡建设部
施行日期： 2020 年3月1日
 
住房和 ...]]></description>
      <category>给排水</category>
      <author>张培哲</author>
      <pubDate>Fri, 07 Feb 2020 03:46:19 +0000</pubDate>
    </item>
    <item>
      <title>洗浴中心排水设计要求</title>
      <link>https://www.peizhe.com/forum.php?mod=viewthread&amp;tid=14764</link>
      <description><![CDATA[**** 本内容被作者隐藏 ****]]></description>
      <category>给排水</category>
      <author>张培哲</author>
      <pubDate>Fri, 28 Jun 2019 03:03:11 +0000</pubDate>
    </item>
    <item>
      <title>经典水管-流速-流量对照表</title>
      <link>https://www.peizhe.com/forum.php?mod=viewthread&amp;tid=14670</link>
      <description><![CDATA[]]></description>
      <category>给排水</category>
      <author>张培哲</author>
      <pubDate>Thu, 09 May 2019 01:40:30 +0000</pubDate>
    </item>
    <item>
      <title>浴场内淋浴花洒热水忽冷忽热是什么原因</title>
      <link>https://www.peizhe.com/forum.php?mod=viewthread&amp;tid=14539</link>
      <description><![CDATA[原因有以下几种
1、水不同源。
这一刻用的是A水箱，下一刻用的是B水箱。
2、调压泵反应效率低
调压泵起到稳压、调压的作用，如果是调压泵质量不好，或者敏感性差，就容易反应迟钝。
造成供水压力不规律。
3、临时密集用水
比如有的水路设计上有临时密集用水，也 ...]]></description>
      <category>给排水</category>
      <author>张培哲</author>
      <pubDate>Thu, 24 Jan 2019 04:51:09 +0000</pubDate>
    </item>
    <item>
      <title>洗浴中心水量计算</title>
      <link>https://www.peizhe.com/forum.php?mod=viewthread&amp;tid=14273</link>
      <description><![CDATA[**** 本内容被作者隐藏 ****]]></description>
      <category>给排水</category>
      <author>张培哲</author>
      <pubDate>Sat, 08 Sep 2018 03:52:42 +0000</pubDate>
    </item>
    <item>
      <title>常压膨胀水箱的安装与补水设计</title>
      <link>https://www.peizhe.com/forum.php?mod=viewthread&amp;tid=13478</link>
      <description><![CDATA[膨胀水箱是热水采暖系统及中央空调水路系统中的重要部件，它的作用是收容和补偿系统中水的胀缩量。
一般都将膨胀水箱设在系统的最高点，通常都接在循环水泵（中央空调冷冻水循环水泵）吸水口附近的回水干管上。
膨胀水箱是一个钢板焊制的容器，有各种大小不同的规格 ...]]></description>
      <category>给排水</category>
      <author>张培哲</author>
      <pubDate>Mon, 19 Mar 2018 04:55:48 +0000</pubDate>
    </item>
    <item>
      <title>洗浴中心污废水排水管道</title>
      <link>https://www.peizhe.com/forum.php?mod=viewthread&amp;tid=13148</link>
      <description><![CDATA[1、宾馆建筑生活排水设计秒流量公式：qp=0.12α+qmaxqp—计算管段排水设计秒流量，L/s；α—宾馆的卫生间α值：1.5，Np—计算管段的卫生器具排水当量总数；qmax—计算管段上最大一个的卫生器具排水流量，L/s。
2、公共洗浴建筑的生活管道排水设计秒流量公式：qp=&amp;#425; ...]]></description>
      <category>给排水</category>
      <author>王杏改</author>
      <pubDate>Fri, 01 Sep 2017 07:28:02 +0000</pubDate>
    </item>
    <item>
      <title>洗浴中心用水量计算</title>
      <link>https://www.peizhe.com/forum.php?mod=viewthread&amp;tid=13143</link>
      <description><![CDATA[洗浴中心用水量计算1、最高日用水量最高日用水量一般用来确定贮水池（箱）容积公式：  Qd=mqd/1000Qd—最高日用水量，m3/d；m—用水单位数（人数、床位数等）；qd—最高日生活用水定额，L/（人. d）、L/（床. d）。  2、最高日最大时用水量最高日最大时用水量一般用来确 ...]]></description>
      <category>给排水</category>
      <author>王晓腾</author>
      <pubDate>Thu, 31 Aug 2017 03:23:37 +0000</pubDate>
    </item>
    <item>
      <title>洗浴中心水量计算</title>
      <link>https://www.peizhe.com/forum.php?mod=viewthread&amp;tid=13142</link>
      <description><![CDATA[洗浴中心水量计算
**** 本内容被作者隐藏 ****]]></description>
      <category>给排水</category>
      <author>王杏改</author>
      <pubDate>Thu, 31 Aug 2017 03:11:05 +0000</pubDate>
    </item>
    <item>
      <title>铁岭汇兴洗浴用水量计算</title>
      <link>https://www.peizhe.com/forum.php?mod=viewthread&amp;tid=11678</link>
      <description><![CDATA[]]></description>
      <category>给排水</category>
      <author>张培哲</author>
      <pubDate>Thu, 08 Oct 2015 12:22:35 +0000</pubDate>
    </item>
    <item>
      <title>建筑给排水设计心得</title>
      <link>https://www.peizhe.com/forum.php?mod=viewthread&amp;tid=11613</link>
      <description><![CDATA[细说经验：

1. 一定要仔细！要知道你少画一笔或少说明一句到了施工现场没准就会出很大的问题。我曾经设计过一个小区，厨房内排水立管和风道开口在一起了，导致油烟机软管接不进去，解决很麻烦，并且给人感觉出的问题很弱智， 其实只是出图时忘了和建筑专业说一句让他 ...]]></description>
      <category>给排水</category>
      <author>张培哲</author>
      <pubDate>Thu, 03 Sep 2015 05:59:19 +0000</pubDate>
    </item>
  </channel>
</rss>